Read the installation instructions.

Carefully review the detailed instructions for your flooring to learn what you'll need and what to expect. Do this well in advance.

Prepare the room.

Clear out furniture. Remove and dispose of old flooring if necessary. Gently remove any wall base, millwork or trim that you'd like to reuse.

Prepare the subfloor.

Be sure the floor you're laying over is dry, clean and flat. If repairs are needed, make those before starting the installation.

Gather additional materials and tools.

Your list could include adhesive, double-faced flooring tape, a vinyl cutting knife, a 100 lb. roller and other tools. Check your installation instructions for specifics.

Acclimate flooring according to instructions, if necessary.

Most vinyl sheet flooring does not require acclimation. Simply unrolling it just prior to installation so it can adjust to the environment is sufficient, and also allows the roll to relax and flatten out. Review your installation instructions, because there may be certain circumstances, such as extreme temperatures, when a short period of acclimation is necessary.

Depending on the type of vinyl sheet floor you’ve chosen, installation instructions will vary. Read every step of the ones provided with your product.

They outline important details and special considerations that might not be obvious, except to an experienced professional, including: subfloor requirements, handling seams, and cutting and fitting methods.

If you or your professional installer has questions before or during installation, contact our Customer Service team.

Once your new floors are in place, clear tools and materials from the area. Clean and seal seams according to your instructions, then clean the floor with the recommended cleaner for vinyl floors.

HOW TO CLEAN VINYL FLOORS